Use this command to display the IPv6 configuration on a specified unit/slot/port.
| Format | show ipv6 verify interface |
| Mode |
|
| Term | Definition |
|---|---|
| Interface | Interface address in unit/slot/port format. |
| Filter Type | Is one of two values: |
| IPv6 Address | IPv6 address of the interface |
| MAC Address | If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port security is disabled on the interface, then the MAC Address field displays "permit-all". |
| VLAN | The VLAN for the binding rule. |
- ip-v6mac: User has configured MAC address filtering on this interface.
- ipv6: Only IPv6 address filtering on this interface.
Example: The following shows example CLI display output for the command.
(switch) #show ipv6 verify 0/1 Interface Filter Type IP Address MAC Address Vlan --------- ----------- --------------- ----------------- ----- 0/1 ipv6-mac 2000::1/64 00:02:B3:06:60:80 10 0/1 ipv6-mac 3000::1/64 00:0F:FE:00:13:04 10
