show auto-voip

Use this command to display the auto VoIP settings on the interface or interfaces of the switch.

Format	`show auto-voip {protocol-based\|oui-based} interface {unit/slot/port\|all}`
Mode	Privileged EXEC

Field	Description
VoIP VLAN ID	The global VoIP VLAN ID.
Prioritization Type	The type of prioritization used on voice traffic.
Class Value	If the Prioritization Type is configured as `traffic-class`, then this value is the queue value. If the Prioritization Type is configured as `remark`, then this value is 802.1p priority used to remark the voice traffic.
Priority	The 802.1p priority. This field is valid for OUI auto VoIP.
AutoVoIP Mode	The Auto VoIP mode on the interface.

Example: The following shows example CLI display output for the command.

(Routing)# show auto-voip protocol-based interface all

VoIP VLAN Id................................... 2
Prioritization Type............................ traffic-class
Class Value.................................... 7

Interface  Auto VoIP      Operational Status
           Mode
---------  -------------- -----------------
0/1        Disabled       Down
0/2        Disabled       Down
0/3        Disabled       Down
0/4        Disabled       Down

Example: The following shows example CLI display output for the command.

(Routing)# show auto-voip oui-based interface all

VoIP VLAN Id................................... 2
Priority....................................... 7

Interface  Auto VoIP      Operational Status
           Mode
---------  -------------- ------------------
0/1        Disabled       Down
0/2        Disabled       Down
0/3        Disabled       Down
0/4        Disabled       Down
0/5        Disabled       Down