This command display the L2 reserved MAC filtering configuration.
| Format | show dot1ad l2tunnel {all | mac-address mac-addr | protocol-id proto-id} | vlan vlan-id} |
| Mode | Privileged EXEC |
Example: The following shows example output for the command show dot1ad l2tunnel all for a device of n ports:
VLAN MAC Address ProtocolId ACTION ----- ------------------ ------------- ----------- 10 01:80:c2:00:00:00 Match All tunnel 10 01:80:c2:00:00:01 Match All discard 10 01:80:c2:00:00:02 0x8100 tunnel 20 01:80:c2:00:00:02 0x88a8 discard and shutdown 30 01:80:c2:00:00:01 0x9100 discard
Example: The following shows example output for the command show dot1ad l2tunnel service 10:
MAC Address ProtocolId ACTION ------------------ ------------- ----------- 01:80:c2:00:00:00 Match All tunnel 01:80:c2:00:00:01 Match All discard 01:80:c2:00:00:02 0x8100 tunnel
Example: The following shows example output for the command show dot1ad l2tunnel mac-address 01-80-c2-00-00-01:
VLAN ProtocolId ACTION ----- ------------------ ----------- 10 0x8100 tunnel 20 0x88a8 discard and shutdown
Example: The following shows example output for the command show dot1ad l2tunnel protocol-id 0x8100:
VLAN MAC Address ACTION ----- ------------------ ----------- 10 01:80:c2:00:00:02 tunnel
Both MAC-address and protocol-id can be used for indexing while displaying entries.
