show ipv6 verify source

Use this command to display the IPv6SG configurations on all ports. If the interface option is specified, the output is restricted to the specified unit/slot/port.

Format	`show ipv6 verify source {interface}`
Mode	Privileged EXEC User EXEC

Term	Definition
Interface	Interface address in unit/slot/port format.
Filter Type	Is one of two values: ip-v6mac: User has configured MAC address filtering on this interface. ipv6: Only IPv6 address filtering on this interface.
IPv6 Address	IPv6 address of the interface
MAC Address	If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port security is disabled on the interface, then the MAC Address field displays "permit-all".
VLAN	The VLAN for the binding rule.

Example: The following shows example CLI display output for the command.

(switch) #show ipv6 verify source

Interface  Filter Type  IP Address       MAC Address        Vlan
---------  -----------  ---------------  -----------------  -----
0/1        ipv6-mac     2000::1/64       00:02:B3:06:60:80  10
0/1        ipv6-mac     3000::1/64       00:0F:FE:00:13:04  10