Use this command to display a summary of the host interface status parameters.
| Format | show ipv6 mld-proxy |
| Mode |
|
The command displays the following parameters only when you enable MLD-Proxy.
| Field | Description |
|---|---|
| Interface Index | The interface number of the MLD-Proxy. |
| Admin Mode | Indicates whether MLD-Proxy is enabled or disabled. This is a configured value. |
| Operational Mode | Indicates whether MLD-Proxy is operationally enabled or disabled. This is a status parameter. |
| Version | The present MLD host version that is operational on the proxy interface. |
| Number of Multicast Groups | The number of multicast groups that are associated with the MLD-Proxy interface. |
| Unsolicited Report Interval | The time interval at which the MLD-Proxy interface sends unsolicited group membership report. |
| Querier IP Address on Proxy Interface | The IP address of the Querier, if any, in the network attached to the upstream interface (MLD- Proxy interface). |
| Older Version 1 Querier Timeout | The interval used to timeout the older version 1 queriers. |
| Proxy Start Frequency | The number of times the MLD-Proxy has been stopped and started. |
Example: The following shows example CLI display output for the command.
(Routing) #show ipv6 mld-proxy Interface Index.............................. 1/0/3 Admin Mode................................... Enable Operational Mode............................. Enable Version...................................... 3 Num of Multicast Groups...................... 0 Unsolicited Report Interval.................. 1 Querier IP Address on Proxy Interface........ fe80::1:2:5 Older Version 1 Querier Timeout.............. 00:00:00 Proxy Start Frequency........................
