poe auto-check (Interface Config)

This command configures the Power-over-Ethernet auto check on the selected interface.

Format poe auto-check failure-action (nothing | reboot) poe auto-check interval-time <10-120> poe auto-check ip <ipaddr> poe auto-check max-reboot-times <0-10> poe auto-check reboot-time <3-120> poe auto-check retry-time <1-5> poe auto-check startup-time <30-60>
Mode Interface Config
Parameter Description
failure-action (nothing | reboot) Set the failure action either to nothing or to reboot.
interval-time <10-120> Set the interval-time in the range of 10 to 120 seconds.
ip <ipaddr> Set the IP address.
max-reboot-times <0-10> Set the maximum reboot times in the range of 0 to 10 seconds.
reboot-time <3-120> Set the reboot-time in the range of 3 to 120 seconds.
retry-time <1-5> Set the retry-time in the range of 1 to 5 seconds.
startup-time <30-60> Set the startup-time in the range of 30 to 60 seconds.

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail [email protected]

LANCOM Logo
OSZAR »