|
Receiver Owner
|
The identity string for the receiver, the entity making use of this sFlowRcvrTable entry. The range is 127 characters. The
default is a null string. The empty string indicates that the entry is currently unclaimed and the receiver configuration is
reset to the default values. An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is unclaimed
before trying to claim it. The entry is claimed by setting the owner string to a non-null value. The entry must be claimed
before assigning a receiver to a sampler or poller.
|
|
Receiver Timeout
|
The time, in seconds, remaining before the sampler or poller is released and stops sending samples to receiver. A
management entity wanting to maintain control of the sampler is responsible for setting a new value before the old one
expires. The allowed range is 0-2147488647 seconds. The default is zero (0).
|
|
No Timeout
|
The configured entry will be in the config until you explicitly removes the entry.
|
| Receiver Max Datagram Size
|
The maximum number of data bytes that can be sent in a single sample datagram. The management entity should set this value
to avoid fragmentation of the sFlow datagrams. The allowed range is 200 to 9116). The default is 1400.
|
|
Receiver IP
|
The sFlow receiver IP address. If set to 0.0.0.0, no sFlow datagrams will be sent. The default is 0.0.0.0.
|
|
Receiver Port
|
The destination Layer4 UDP port for sFlow datagrams. The range is 1-65535. The default is 6343.
|
