This command configures flow based statistics rules for the given parameters over the specified time range. Only an IPv4 address is allowed as source and destination IP address.
| Format | stats flow-based rule-id timerange time range name [{srcip ip-address} {dstip ip-address} {srcmac mac-address} {dstmac mac-address} {srctcpport portid} {dsttcpport portid} {srcudpport portid} {dstudpport portid}] |
| Mode | Global Config |
| Parameter | Description |
|---|---|
| rule ID | The flow-based rule ID. The range is 1 to 16. The default is None. |
| time range name | Name of the time range for the group or the flow-based rule. The range is 1 to 31 alphanumeric characters. The default is None. |
| srcip ip-address | The source IP address. |
| dstip ip-address | The destination IP address. |
| srcmac mac-address | The source MAC address. |
| dstmac mac-address | The destination MAC address. |
| srctcpport portid | The source TCP port number. |
| dsttcpport portid | The destination TCP port number. |
| srcudpport portid | The source UDP port number. |
| dstudpport portid | The destination UDP port number. |
Example: The following shows examples of the command.
(Routing) (Config)#stats flow-based 1 timerange test srcip 1.1.1.1 dstip 2.2.2.2 srcmac 1234 dstmac 1234 srctcpport 123 dsttcpport 123 srcudpport 123 dstudpport 123 (Routing) (Config)#stats flow-based 2 timerange test srcip 1.1.1.1 dstip 2.2.2.2 srctcpport 123 dsttcpport 123 srcudpport 123 dstudpport 123
