Use this command to set the estimated round-trip delay in microseconds between an NTP client and an NTP broadcast server. The delay is applicable only when the client is configured in broadcast mode. See the ntp broadcast client command.
| Default | 3000 microseconds |
| Format | ntp broadcastdelay <microseconds> |
| Mode | Global Config |
| Parameter | Description |
|---|---|
| microseconds | The delay in microseconds. The range is 1 to 999,999. |
Example: The following is an example of the command.
(Routing) #configure (Routing) (Config) #ntp broadcastdelay 10000
