This command configures the priority of the MLAG (VPC) switch. This value is used for the MLAG (VPC) role election. The priority value is sent to the peer in the MLAG keepalive messages. The MLAG switch with lower priority becomes the Primary and the switch with higher priority becomes the Secondary. If both MLAG peer switches have the same role priority, the device with the lower system MAC address becomes the Primary.
Note:
The keepalive state machine is not restarted even if the keepalive priority is modified post-election.
The priority can be between 1 and 255 seconds.
| Default | 100 |
| Format | role priority value |
| Mode | VPC Config |
