Use this command to automatically enable the following features for MLD Snooping at the VLAN level. The command is enabled for VLAN1 by default. For all other VLANs, configure the command manually.
| Feature | CLI Command |
|---|---|
| MLD Snooping admin mode | set mld |
| Exclude Mrouter Interface mode | set mld exclude-mrouter-intf (VLAN Config) |
| Fast-Leave | set mld fast-leave |
| Default | Disabled |
| Format | set mld-plus vlan-id |
| Mode | VLAN Config |
| Parameter | Description |
|---|---|
| vlan-id | A valid VLAN ID. Range is 1 to 4093. |
