Use this command to display the specified service or all the services information (i.e. service name, service type and the S- VID) configured on the CPE.
| Format | show dot1ad service [[service-name] [unit/slot/port]] |
| Mode | Privileged EXEC |
Example: The following shows example CLI display output for the command.
(Switch) #show dot1ad service service name service type s-vid NNI ------------------------ ------------- ------- ---- s1 e-lan 100 1/0/6,1/0/8 s2 e-line 200 1/0/12 s3 e-tree 300 1/0/18 s4 tls 400 1/0/2,1/0/1 (Switch) #show dot1ad service s1 Service Name................................... s1 Service Type................................... e-lan Service VLAN ID................................ 100 NNI ports.......................................1/0/6,1/0/8 (Switch) #show dot1ad service s1 1/0/1 Service Name................................... s1 Interface...................................... 1/0/1 NNI Interfaces..................................1/0/6,1/0/8 Service Type................................... e-lan Subscription Name.............................. sub1 Packet Type.................................... VLAN tagged Assign C-VID................................... 50 Match C-VID.................................... 10 (Switch) #show dot1ad service s3 1/0/4 Service Name................................... s3 Interface...................................... 1/0/4 NNI Interface...................................1/0/6 Service Type................................... e-tree Subscription Name.............................. sub3 Packet Type.................................... VLAN tagged Match Priority................................. 4 Match C-VID.................................... 10 Remove C-tag................................... YES
